807354389340702
Home > Electrical supplies > Presence detectors > Niko Presence detector 230V 360° 24m White
Niko Presence detector 230V 360° 24m White
3 piece(s) in stock
|
Immediate shipping
 

4 years

3 piece(s) in stock

Professional support

FREE delivery


Need advice? Our experts are ready to help you. Contact us.
Product information
About product

DESCRIPTION

This presence or absence detector with one channel (360°, 10 A) is suitable for surface-mounting in ceilings and is used to switch indoor lighting on and off. The detector has a circular detection area with a diameter of up to 24 m that can be adjusted using the cover mask. The device with integrated light sensor can be set up as a presence or as an absence detector. When used as a presence detector, the lighting automatically switches on and off (as soon as the switch-off delay has elapsed). When used as an absence detector, the lighting must always be manually switched on first using an NO push button, after which it will be automatically switched off (as soon as the switch-off delay has elapsed). The device is also equipped with the ‘eco off’ function, which allows the user to switch the lighting off using a connected NO push button without having to wait for the switch-off delay. If the lighting is not switched off manually, it will be switched off automatically once the switch-off delay has elapsed. The device has an IP54 protection degree, a potential-free contact and conforms to the European EN 0669-2-1 standard for EMC and safety. The set-up can be performed manually on the device itself or via a remote control. The product can be used as a stand-alone unit or in combination with a maximum of ten slaves.

Finishing colour: white.

SPECIFICATION DESCRIPTION

Presence or absence detector, 10 A (230 V), 24 m, PIR 360° (230 V), master, one channel, for surface-mounting. (white). The detector is suitable for switching indoor lighting on and off in small offices, large multi-use rooms (such as dressing rooms) and large warehouses. The detector is equipped with an integrated light sensor which switches off the lighting as soon as sufficient daylight is measured in the room. The detection area of the detector can be increased by connecting a maximum of ten slaves to the master. The detector can be used with the factory settings, or the settings can be manually adjusted on the device. The detection area can be divided by means of an adjustable cover mask. Factory settings:

  • sensitivity of the motion sensor: high
  • application: presence detector, daylight-dependent, automatic on/off via PIR (as soon as the switch-off delay has elapsed)
  • push-button application: in the mode: ‘eco off’, the lighting can be switched off manually using an NO push button without having to wait for the switch-off delay. The lighting can also be switched on manually if the sensor has not yet registered any movement (such as a button outside the area). The lighting is only switched on if the amount of daylight available in the room is insufficient. Pressing and holding the push button switches the lighting on or off for two hours, irrespective of the detected movement and the registered light level. After that time, the detector resumes its normal operation.
  • switch-off delay: 10 min
  • light sensitivity: 200 lux
  • function: the detector activates the lighting automatically if the motion sensor detects movement in the area and the light level is below the selected lux value. If the detector no longer detects any movement in the detection area, the lighting is automatically switched off after the switch-off delay, unless the user decides to manually switch off the lighting sooner.

The detector has two potentiometers and six DIP switches for manually adjusting the settings:

  • potentiometer 1: setting the light sensitivity (20 lux up to light-independent)
  • potentiometer 2: setting the switch-off delay (2 up to 60 minutes)
  • the four DIP switches enable the selection of various functionalities: presence or absence detection, detection sensitivity, ‘eco off’ function, daylight-dependent or daylight-independent push button.
  • using the two DIP switches, the sensitivity of the motion sensor can be increased or decreased. Setting via the remote control: The user can use the remote control to set up the detector entirely according to his requirements.
  • Input voltage: 230 V DC ± 10 %, 50 - 60 Hz
  • Number of channels: 1 channel
  • Response value luminosity: 20 - 1000 lux, ∞
  • Hysteresis on light sensitivity: + 10 %
  • Switch-off delay: 120 - 3600 s
  • Detection angle: 360 °
  • Detection range (PIR): up to 28 m in diameter from a height of 3 m
  • Ambient temperature: -5 - 50 °C
  • Mounting method: surface-mounting
  • Mounting height: 2 - 3.5 m
  • Relay contact 1: NO (max. 10 A), potential-free, light- and motion-sensitive
  • Maximum load incandescent and halogen lamps (cosφ=1): 2300 W
  • Maximum load low voltage halogen lamps: 1200 W
  • Maximum load economy lamps (CFLi): 350 W
  • Maximum load LED lamps 230 V: 350 W
  • Maximum capacitive load: 140 µF
  • Maximum switching current: 165 A/20 ms – 800 A/200 µs
  • Dimensions (HxWxD): 117.3 x 117.3 x 64.1 mm
  • Dimensions visible (HxWxD): 117.3 x 117.3 x 64.1 mm
  • Protection degree: IP54
  • Protection class: Class I device
  • Marking: CE
Concise specifications
Product dimensions
∅118 x 65 mm ( ∅ x H )
Technical datasheet
Reviews
This product is not yet reviewed. Be the first to review this product!
Product questions
No questions have been asked about this product yet. Do you have a question? Ask us!
Technical details
Technical details
Technical datasheet
Installation and dimensions
Product dimensions
∅118 x 65 mm ( ∅ x H )
Manual
Design
Brand
Colour
White
Supplier number
350-20078
dmlights product code
350-20078
EAN/Barcode
5413736313774
Delivery conditions
Delivery time
Warranty
4 year(s)
Sales unit
Per piece
Follow us on Instagram
Discover the latest trends and novelties in the world of lighting.
© 2014 - 2021(Elektriciteit Paul de Meutter CV)

The content of this Website, including trademarks, patents, copyrights, database rights, drawings and models, images, company- and product-names and/or other (intellectual property rights), are protected by intellectual property rights belonging to dmlights or any rightful third. You shall not use and/or change any of the protected content as described in the present article, including any copying, lending, reproducing, any use of dmlights’ database content or any use in whatever way, without prior written authorization by dmlights. Any infringement shall be prosecuted under applicable laws.