Switch for orientation lighting with RGB LEDs, with claw fixing. This orientation lighting can be directly connected to Nikobus. It has 15 modes that can be programmed using the Nikobus software. A flush surround plate in the colour of your choice must be ordered separately.
The Nikobus reference codes no longer feature in the Niko catalogue. We are no longer actively promoting the Nikobus products. We do, however, still make them in order to source spare parts or to complete an existing installation. For new projects, we recommend choosing Niko Home Control.
Orientation lighting with RGB LEDs for Nikobus. There are 15 application modes (e.g. dimming on/off, changing colour, setting brightness, ..). Using the factory settings, it is possible to manually program a 4-key control for RGB colour and brightness. For the other settings, the Nikobus software is required. Via that same Nikobus software, several orientation LEDs can also be arranged in a master/slave configuration for reacting synchronously to one and the same command. There is a maximum of 4 masters per installation and 8 slaves per master. This Nikobus orientation lighting unit consists of a module of 45 x 45 x 32 mm (WxHxD) that is clicked into a 45 x 45 mm, metal flush-mounting frame. The lighting module is made of white, translucent polycarbonate. The colours are produced by LEDs (class T or S) with a very low power consumption. They are shockproof and do not radiate any heat. The LEDs have a life span of more than 60,000 burning hours. The orientation lighting unit does not require extra plasterwork since it is mounted very easily in all existing flush-mounting boxes. This orientation lighting unit works on a voltage of 12-24 V. This product can be provided with an emergency battery with ref. 170-38020 (NiMH, to be ordered separately). In case of a power cut, the integrated emergency battery takes over the power supply for 15 min. The sockets are equipped with plug-in terminals for clamping the wires. All connection terminals can contain up to 2 x 2.5 mm² of wire. When mounting the socket outlet in a flush-mounting box with grip surfaces, use claws that can be rotated open using screws with a combination screwhead (Pz1 or slot 1 x 5 mm). The claws, which have a depth of engagement of 31 mm, can be manually pushed back into their original position after unscrewing. These claws can also be easily pushed out using a screwdriver. The flush-mounting frame is made from 1 mm-thick metal which is galvanized on all sides after cutting, even on the cut edges. On the horizontal and vertical axes, the flush-mounting frame has 4 grooves for screw mounting in flush-mounting boxes. These grooves have a screw aperture of 7 mm. For mounting on panels, the flush-mounting frame is equipped with 4 screw holes (indicated by a screw symbol) with a diameter of 3 mm. The middle of the flush-mounting frame is indicated (chalk line, laser, ..) in both the horizontal and vertical directions, so that mounting one or more mechanisms can be carried out quickly and easily. At the right and left sides, the flush-mounting frame is equipped with folded-up dovetails, allowing for a quick and perfect horizontal coupling of several switches. The folded-up edges on the outside of the base and their continuation to the inside ensure additional robustness. The bases can be coupled vertically with a centre-to-centre distance of 60 mm by sliding them into each other. They automatically lock into place. For horizontal coupling of bases with a centre-to-centre distance of 71 mm, the base is equipped with two pre-formed lips at the bottom. By folding these lips down over a length of 1 mm, this rests perfectly on the one below and the centre-to-centre distance of 71 mm is guaranteed. The flush-mounting frame is equipped, both on the top and the bottom, with a dark grey, plastic end border. This border is made of PC+ASA and is joined to the flush-mounting frame using a melting process. The corners of the two end borders are equipped with rectangular openings (7.9 x 1.5 mm) each containing a multi-positional snap hook. Thanks to the snap hooks, the 4 rectangular openings ensure that the flush surround plate can always be attached flat to the wall, even in cases of untidy plasterwork. This works in two directions: If the flush-mounting box sticks out of the plasterwork, the multi-positional snap hooks can compensate for a 1 to 1.2 mm margin; if the flush-mounting box is sunk too deeply in the plasterwork, the snap hooks can compensate for up to a 1.8 mm margin. The end borders also have 4 round openings that ensure the correct positioning of the flush surround plate in relation to the central plate.
- LED colour: RGB
- All plastic components are self-extinguishing (comply with a filament test of 650°C) and are halogen-free.
- Power consumption: > 0.6
- Protection degree: The combination of a switch, a central plate and a flush surround plate has a protection degree of IP41.
- Flush-mounting depth: 32 mm
- Marking: CE